Dell PowerEdge M IO Aggregator Скачать руководство пользователя страница 193

Страница: 193 / 264

Link Layer Discovery Protocol (LLDP) |

191

protocol lldp (Configuration)

Enable LLDP globally on the switch.

Syntax

protocol lldp

To disable LLDP globally on the chassis, use the

no protocol lldp

command.

Defaults

Disabled

Command Modes

CONFIGURATION (conf-lldp)

Command

History

protocol lldp (Interface)

Enter the LLDP protocol in the INTERFACE mode.

Syntax

[

]

protocol lldp

To return to the global LLDP configuration mode, use the

no protocol lldp

command from the Interface

mode.

Defaults

LLDP is not enabled on the interface.

Command Modes

INTERFACE (conf-if-

interface

-lldp)

Command

History

Usage

Information

You must enable LLDP globally from CONFIGURATION mode before you can configure it on an

interface. This command places you in LLDP mode on the interface; it does not enable the protocol.

When you enter the LLDP protocol in the Interface context, it overrides global configurations. When
you execute the

no protocol lldp

from INTERFACE mode, interfaces begin to inherit the configuration

from global LLDP CONFIGURATION mode.

show lldp neighbors

Displays LLDP neighbor information for all interfaces or a specified interface.

Syntax

show lldp neighbors

[

interface

] [

detail

]

Parameters

Version 8.3.17.0

Supported on M I/O Aggregator

Version 8.3.17.0

Supported on M I/O Aggregator

interface

(OPTIONAL) Enter the following keywords and slot/port or number information:

•

For a 10-Gigabit Ethernet interface, enter the keyword

tenGigabitEthernet

followed by the slot/port information.

detail

(OPTIONAL) Enter the keyword

detail

to display all the TLV information, timers, and

LLDP tx and rx counters.

Содержание PowerEdge M IO Aggregator









































































































































































































































































Результаты поиска

Содержание PowerEdge M IO Aggregator

Отзывы:

Бренды по названию

Популярные бренды

Dell PowerEdge M IO Aggregator, Справочное руководство

Результаты поиска

Содержание PowerEdge M IO Aggregator

Отзывы:

Бренды по названию

Популярные бренды