manualshive.com logo in svg

Dell PowerEdge M IO Aggregator, Справочное руководство

Поделиться
Скачать
Dell PowerEdge M IO Aggregator Скачать руководство пользователя страница 149

Interfaces |

147

Example

Figure 11-22.  show interfaces description Command Example 

show interfaces port-channel

Displays information on configured Port Channel groups.

Syntax

show

 

interfaces

 

port-channel

 [

channel-number

] [

brief | description

]

Parameters

 

Command Modes

EXEC

EXEC Privilege

Command

History

Table 11-5.  show interfaces description Command Example Fields

Field

Description

Interface

Displays type of interface and associated slot and port number.

OK?

Indicates if the hardware is functioning properly.

Status

States whether the interface is enabled (up) or disabled (administratively down).

Protocol

States whether IP is enabled (up) or disabled (down) on the interface.

Description

Displays the description (if any) manually configured for the interface.

FTOS#show interface description
Interface                OK  Status     Protocol    Description
TenGigabitEthernet 0/1   NO  admin down down
TenGigabitEthernet 0/2   NO  admin down down
TenGigabitEthernet 0/3   NO  admin down down
TenGigabitEthernet 0/4   NO  admin down down
TenGigabitEthernet 0/5   NO  admin down down
TenGigabitEthernet 0/6   NO  admin down down
TenGigabitEthernet 0/7   NO  up         down
TenGigabitEthernet 0/8   YES up         up
TenGigabitEthernet 0/9   NO  admin down down
TenGigabitEthernet 0/10  NO  admin down down
TenGigabitEthernet 0/11  NO  admin down down
TenGigabitEthernet 0/12  NO  admin down down
TenGigabitEthernet 0/13  NO  admin down down
TenGigabitEthernet 0/14  NO  admin down down
TenGigabitEthernet 0/15  NO  admin down down
TenGigabitEthernet 0/16  YES up         up
TenGigabitEthernet 0/17  NO  admin down down
TenGigabitEthernet 0/18  NO  admin down down
TenGigabitEthernet 0/19  NO  admin down down
TenGigabitEthernet 0/20  NO  admin down down
TenGigabitEthernet 0/21  NO  admin down down

channel-number

For a Port Channel interface, enter the keyword 

port-channel

 followed by a 

number:

Range: 1-128

brief

(OPTIONAL) Enter the keyword 

brief

 to display only the port channel 

number, the state of the port channel, and the number of interfaces in the port 
channel. 

description

(OPTIONAL) Enter the keyword 

description 

to display interface 

information with description.

Version 8.3.17.0

Supported on M I/O Aggregator

Содержание PowerEdge M IO Aggregator









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды