manualshive.com logo in svg

Dell PowerEdge M IO Aggregator, Справочное руководство

Поделиться
Скачать
Dell PowerEdge M IO Aggregator Скачать руководство пользователя страница 215

Simple Network Management Protocol (SNMP) and Syslog |

213

logging history

Specify which messages are logged to the history table of the switch and the SNMP network 
management station (if configured). 

Syntax

logging history 

level

To return to the default values, use the 

no logging history

 command.

Parameters

 

Defaults

4 or warnings

Command Modes

CONFIGURATION

Command

History

Related

Commands

 

logging history size

Specify the number of messages stored in the FTOS logging history table. 

Syntax

logging history

 

size

 

size

To return to the default values, use the 

no logging history size

 command.

Parameters

 

Defaults

1 message

Command Modes

CONFIGURATION

Command

History

Usage

Information

When the number of messages reaches the limit you set with the 

logging history size

 command, older 

messages are deleted as newer ones are added to the table.

Related

Commands

 

level

Indicate a value from 0 to 7 or enter one of the following equivalent words: 
emergencies, alerts, critical, errors, warnings, notifications, informational, or 
debugging. 

The default is 4.

Version 8.3.17.0

Supported on M I/O Aggregator

show logging

 

history

Displays information logged to the history buffer.

size

Indicate a value as the number of messages to be stored.

Range: 0 to 500. 

Default: 1 message.

Version 8.3.17.0

Supported on M I/O Aggregator

show logging

 

history

Displays information logged to the history buffer.

Содержание PowerEdge M IO Aggregator









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды