manualshive.com logo in svg

Dell PowerEdge M IO Aggregator, Справочное руководство

Поделиться
Скачать
Dell PowerEdge M IO Aggregator Скачать руководство пользователя страница 223

Stacking Commands |

221

21

Stacking Commands

Overview

Stacking is supported on an Aggregator only on the 40GbE ports on the base module. Stacking is 
limited to two Aggregators in the same chassis in a single stack. Up to three stacks are supported in an 
M1000e chassis. 

Stacking provides a single point of management and NIC teaming for high availability and higher 
throughput. To configure an Aggregator stack, you must use the CLI.

The stacking commands are always available and operational, whether or not an Aggregator has a 
stacking module inserted. You can use the commands to pre-configure an Aggregator, so that the 
configuration settings are invoked when the Aggregator is attached to other Aggregator blades.

For more information about using the Aggregator stacking feature, refer to the “Stacking Aggregators” 
chapter in the Dell Force10 Configuration Guide for the M I/O Aggregator.

Stacking Commands

You can use the following commands to manage a stack of Aggregator IO modules:

•

power-cycle stack-unit

•

reset stack-unit

•

show system stack-ports

•

show system stack-unit iom-mode

•

show system stack-unit fanout

•

show system stack-unit stack-group

•

stack-unit iom-mode

power-cycle stack-unit

To hard reset any stack unit including master unit.

Syntax

power-cycle stack-unit 

[

0-5

 | 

all

]

Default

None

Command Modes

EXEC Privilege

Содержание PowerEdge M IO Aggregator









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды