manualshive.com logo in svg

Dell PowerEdge M IO Aggregator, Справочное руководство

Поделиться
Скачать
Dell PowerEdge M IO Aggregator Скачать руководство пользователя страница 172

170

|

IPv4 Routing

www.dell.com | support.dell.com

Parameter

Command Modes

EXEC

EXEC Privilege

Command

History

Example

Figure 12-9.  show ip interface Command Example 

interface

(OPTIONAL) Enter the following keywords and slot/port or number information:

•

For the Management interface, enter the keyword 

ManagementEthernet 

followed by zero (0).

•

For a Port Channel interface, enter the keyword 

port-channel

 followed by a 

number:

Range: 1 to 128

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 

followed by the slot/port information. 

•

For a VLAN, enter the keyword 

vlan

 followed by a number from 1 to 4094.

brief

(OPTIONAL) Enter the keyword 

brief

 to view a brief summary of the interfaces and 

whether an IP address is assigned.

configuration

(OPTIONAL) Enter the keyword 

configuration

 to display the physical interfaces 

with non-default configurations only.

Version 8.3.17.0

Supported on M I/O Aggregator

Table 12-5.  show ip interface Command Example Items  

Lines

Description

TenGigabitEthernet 0/0...

Displays the interface’s type, slot/port and physical and line protocol 
status.

Internet address...

States whether an IP address is assigned to the interface. If one is, that 
address is displayed.

IP MTU is...

Displays IP MTU value.

Inbound access...

Displays the name of the any configured incoming access list. If none is 
configured, the phrase “not set” is displayed.

Proxy ARP...

States whether proxy ARP is enabled on the interface.

Split horizon...

States whether split horizon for RIP is enabled on the interface.

Poison Reverse...

States whether poison for RIP is enabled on the interface

ICMP redirects...

States if ICMP redirects are sent.

ICMP unreachables...

States if ICMP unreachable messages are sent.

FTOS#show ip int te 0/0
TenGigabitEthernet 0/0 is down, line protocol is down
Internet address is not set
IP MTU is 1500 bytes
Inbound  access list is not set
Proxy ARP is enabled
Split Horizon is enabled
Poison Reverse is disabled
ICMP redirects are not sent
ICMP unreachables are not sent

FTOS#

Содержание PowerEdge M IO Aggregator









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды