Dell PowerEdge 860 Скачать руководство пользователя страница 93 | Manualshive

Страница: 93 / 140

background image

Running the System Diagnostics

93

Running the System Diagnostics

If you experience a problem with your system, run the diagnostics before calling for technical assistance.
The purpose of the diagnostics is to test your system's hardware without requiring additional equipment
or risking data loss. If you are unable to fix the problem yourself, service and support personnel can use
diagnostics test results to help you solve the problem.

Using Dell PowerEdge Diagnostics

To assess a system problem, first use the online Dell

®

PowerEdge

®

Diagnostics. Dell PowerEdge

Diagnostics is a suite of diagnostic programs, or test modules, that include diagnostic tests on chassis
and storage components such as hard drives, physical memory, communications and printer ports,
NICs, CMOS, and more. If you are unable to identify the problem using the PowerEdge Diagnostics,
then use the system diagnostics.

The files required to run PowerEdge Diagnostics for systems running supported Microsoft

®

Windows

®

and Linux operating systems are available at

support.dell.com

and on the CDs that came with your

system. For information about using diagnostics, see the

Dell PowerEdge Diagnostics User's Guide

.

System Diagnostics Features

The system diagnostics provides a series of menus and options for particular device groups or devices.
The system diagnostics menus and options allow you to:

•

Run tests individually or collectively.

•

Control the sequence of tests.

•

Repeat tests.

•

Display, print, or save test results.

•

Temporarily suspend testing if an error is detected or terminate testing when a user-defined error
limit is reached.

•

View help messages that briefly describe each test and its parameters.

•

View status messages that inform you if tests are completed successfully.

•

View error messages that inform you of problems encountered during testing.

«
...
91
92
93
94
95
...
»

Содержание PowerEdge 860













































































































































Отзывы:

Нет отзывов

Похожие инструкции для PowerEdge 860

Бренд: Omnia Страницы: 102

Univerge SV9300

Бренд: NEC Страницы: 26

Бренд: NEC Страницы: 20

DS2000 IntraMail

Бренд: NEC Страницы: 2

Бренд: IOtech Страницы: 16

ZyXEL ZyAIR B-120

Бренд: ZyXEL Communications Страницы: 20

EK-Loop Modulus Series

Бренд: ekwb Страницы: 7

Бренд: ZALMAN Страницы: 9

Бренд: Renesas Страницы: 67

Бренд: DTS Страницы: 94

Modular Fast Fiber Switch Converter MT-RJ

Бренд: Lindy Страницы: 3

Бренд: ST Страницы: 37

Бренд: ZALMAN Страницы: 6

Бренд: Cypress Semiconductor Страницы: 32

Бренд: Epson Страницы: 97

Бренд: Epson Страницы: 159

ARM720T Core cpu

Бренд: Epson Страницы: 224

Бренд: Epson Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды