Dell OptiPlex G1, Руководство по обслуживанию

Страница: 85 / 144

Removing and Replacing Parts on the Midsize Chassis 5-3
,QVLGHWKH&RPSXWHU
Figure 5-1 shows an internal view of the midsize computer and identifies major
components for orientation. Refer to this illustration, as needed, when per-
forming the component removal/replacement procedures in this chapter.
)LJXUH,QWHUQDO9LHZRIWKH0LGVL]H&RPSXWHU
8VLQJWKH2SWLRQDO6WDQGIRU9HUWLFDO
2ULHQWDWLRQ
Dell offers an optional stand that you can attach to the computer for a mini
tower (vertical) orientation. Although you can attach (and remove) the stand at
any time with a minimum of system disruption, it is easiest to attach before
you set up your computer and connect the back-panel cables.
To attach the stand, follow these steps:
7XUQWKHFRPSXWHURQWRLWVULJKWVLGHVRWKDWWKHGULYHED\VDUHDW
WKHERWWRP
)LWWKHVWDQGRQWRZKDW
ZDV
WKHOHIWVLGHRIWKHFRPSXWHU
Position the stand as shown in Figure 5-2. Align the large round hole in the
stand with the securing button on the side of the cover, and align the cap-
tive thumbscrew in the stand with the screw hole in the cover.
power supply
diskette/tape drive interface cable
hard-disk drive
bracket
hard-disk drive
interface
cable
3.5-inch diskette drive
expansion-card cage
system board
external drive bays