Dell Inspiron 410 Скачать руководство пользователя страница 10

Страница: 10 / 45

Back to Contents Page

Graphics Card

Dell™ Inspiron™ 410 Service Manual

Removing the Graphics Card

Replacing the Graphics Card

Removing the Graphics Card

Follow the procedures in

Before You Begin

Remove the bottom cover (see

Removing the Bottom Cover

Remove the two screws that secure the graphics card to the system board.

Remove the graphics card from the system board connector.

Replacing the Graphics Card

Follow the procedures in

Before You Begin

Align the notch on the graphics card with the tab in the system-board connector.

Insert the graphics card at a 45-degree angle into the system board connector.

Press the other end of the graphics card down and replace the two screws that secure the graphics card to the system-board connector.

Replace the bottom cover (see

Replacing the Bottom Cover

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

graphics card

screws (2)

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Содержание Inspiron 410














































Результаты поиска

Содержание Inspiron 410

Отзывы:

Похожие инструкции для Inspiron 410

Бренды по названию

Популярные бренды

Dell Inspiron 410, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 410

Отзывы:

Похожие инструкции для Inspiron 410

Бренды по названию

Популярные бренды