Dell Inspiron 410 Скачать руководство пользователя страница 6

Страница: 6 / 45

Back to Contents Page

Wireless Mini-Card

Dell™ Inspiron™ 410 Service Manual

Removing the Mini-Card

Replacing the Mini-Card

If you ordered a wireless Mini-Card with your computer, the card is already installed.

Your computer supports one half Mini-Card slot for Wireless Local Area Network (WLAN).

Removing the Mini-Card

Follow the procedures in

Before You Begin

Remove the top cover (see

Removing the Top Cover

Remove the top bracket (see

Removing the Top Bracket

Remove the optical drive (see

Removing the Optical Drive

Remove the drive bay (see

Removing the Drive Bay

Locate the Mini-card (see

System Board Components

Disconnect the antenna cables from the Mini-Card.

Remove the screw that secures the Mini-Card to the system-board connector.

Lift the Mini-Card away from the system-board connector.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

NOTE:

Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell.

antenna cables (2)

Mini-Card

system-board connector

CAUTION:

When the Mini-Card is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge"

in the safety instructions that shipped with your computer).

Содержание Inspiron 410














































Результаты поиска

Содержание Inspiron 410

Отзывы:

Похожие инструкции для Inspiron 410

Бренды по названию

Популярные бренды

Dell Inspiron 410, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 410

Отзывы:

Похожие инструкции для Inspiron 410

Бренды по названию

Популярные бренды