Dell Inspiron 410 Скачать руководство пользователя страница 20

Страница: 20 / 45

Back to Contents Page

I/O Bezel

Dell™ Inspiron™ 410 Service Manual

Removing the I/O Bezel

Replacing the I/O Bezel

Removing the I/O Bezel

Follow the procedures in

Before You Begin

Remove the top cover (see

Removing the Top Cover

Remove the bottom cover (see

Removing the Bottom Cover

Press to release the tabs on the bottom of the I/O bezel from the slots on the chassis and lift the I/O bezel out of the computer.

Replacing the I/O Bezel

Follow the procedures in

Before You Begin

Align the tabs on the I/O bezel with the slots on the computer and snap the I/O bezel into place.

Replace the bottom cover (see

Replacing the Bottom Cover

Replace the top cover (see

Replacing the Top Cover

Connect your computer and all attached devices to electrical outlets, and turn them on.

Back to Contents Page

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

tabs (3)

I/O bezel

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Содержание Inspiron 410














































Результаты поиска

Содержание Inspiron 410

Отзывы:

Похожие инструкции для Inspiron 410

Бренды по названию

Популярные бренды

Dell Inspiron 410, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 410

Отзывы:

Похожие инструкции для Inspiron 410

Бренды по названию

Популярные бренды