Dell Inspiron 410 Скачать руководство пользователя страница 37

Страница: 37 / 45

Boot Options

Hard Drive

—

The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error

message.

USB Flash Device

—

Insert the memory device into a USB port and restart the computer. When

F12 = Boot Options

appears in the lower-right corner

of the screen, press <F12>. The BIOS detects the device and adds the USB flash option to the boot menu.

CD/DVD Drive

—

The computer attempts to boot from the CD/DVD drive. If no CD/DVD is in the drive, or if the CD/DVD has no operating system, the

computer generates an error message.

Changing Boot Sequence for the Current Boot

You can use this feature to change the current boot sequence, for example, to boot from the CD/DVD drive to run the Dell Diagnostics on the

Drivers and

Utilities

media. On completion of diagnostic tests, the previous boot sequence is restored.

If you are booting to a USB device, connect the USB device to a USB connector.

Turn on (or restart) your computer.

When

F2 = Setup, F12 = Boot Options

appears in the lower-right corner of the screen, press <F12>.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down your
computer and try again.

The

Boot Device Menu

appears, listing all available boot devices.

On the

Boot Device Menu

choose the device you want to boot from.

For example, if you are booting to a USB memory key, highlight

USB Flash Device

and press <Enter>.

Changing Boot Sequence for Future Boots

Enter the system setup utility (see

Entering the System Setup Utility

Use the arrow keys to highlight the

Boot

menu option and press <Enter> to access the menu.

Press the up- and down-arrow keys to move through the list of devices.

Press plus (+) or minus (

–

) to change the boot priority of the device.

Clearing Forgotten Passwords and CMOS Settings

Follow the procedures in

Before You Begin

Remove the top cover (see

Removing the Top Cover

Remove the top bracket (see

Removing the Top Bracket

NOTE:

To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device documentation.

NOTE:

To boot to a USB device, the device must be bootable. To ensure your device is bootable, check the device documentation.

NOTE:

Write down your current boot sequence in case you want to restore it.

WARNING:

Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

WARNING:

The computer must be disconnected from the electrical outlet to clear the CMOS setting.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

Clearing the CMOS settings will also clear the passwords.

Содержание Inspiron 410














































Результаты поиска

Содержание Inspiron 410

Отзывы:

Похожие инструкции для Inspiron 410

Бренды по названию

Популярные бренды

Dell Inspiron 410, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 410

Отзывы:

Похожие инструкции для Inspiron 410

Бренды по названию

Популярные бренды