manualshive.com logo in svg

Dell Brocade DCX, Руководство по настройке

Dell Brocade DCX - высокопроизводительный коммутатор с возможностью настройки для сложных сетей. Полное описание функций и возможностей устройства можно найти в Configuration Manual. Скачайте его бесплатно с manualshive.com для подробной информации о настройке и использовании продукта.

Поделиться
Скачать
background image

290

BigIron RX Series Configuration Guide

53-1001810-01

Configuring virtual routing interfaces

11

Integrated Switch Routing (ISR)

Brocade Integrated Switch Routing (ISR) feature enables VLANs configured on the device to route 
Layer 3 traffic from one protocol-based VLAN to another instead of forwarding the traffic to an 
external router. The VLANs provide Layer 3 broadcast domains for the protocols, but do not in 
themselves provide routing services. This is true even if the source and destination protocols are on 
the same device.

ISR eliminates the need for an external router by allowing you to route between VLANs using virtual 
routing interfaces (ves). You configure a separate virtual routing interface on each VLAN that you 
want to use to route packets. For example, if you configure two IP protocol VLANs on a device, you 
can configure a virtual routing interface on each of the IP protocol VLAN, then configure IP routing 
parameters for the IP protocol VLAN. Thus, the device forwards IP broadcasts within each VLAN at 
Layer 2 but routes Layer 3 traffic between the VLANs using the virtual routing interfaces.

NOTE

The device uses the lowest MAC address on the device (the MAC address of port 1/1) as the MAC 
address for all ports within all virtual routing interfaces you configure on the device.

The routing parameters and the syntax for configuring them are the same as when you configure a 
physical interface for routing (for example, interface ve 10). The logical interface allows the device 
to internally route traffic between the protocol-based VLANs without using physical interfaces. 

All the ports within a protocol-based VLAN must be in the same port-based VLAN.  The 
protocol-based VLAN cannot have ports in multiple port-based VLANs, unless the ports in the 
port-based VLAN to which you add the protocol-based VLAN are 802.1q tagged.

You can configure multiple protocol-based VLANs within the same port-based VLAN.  In addition, a 
port within a port-based VLAN can belong to multiple protocol-based VLANs of the same type or 
different types.  For example, if you have a port-based VLAN that contains ports 1/1 – 1/10, you 
can configure port 1/5 as a member of an AppleTalk protocol VLAN, an IP protocol VLAN, and an 
IPX protocol VLAN, and so on.

If the router interface for IP is configured on physical ports, then routing occurs independent of the 
Spanning Tree Protocol (STP).  However, if the router interfaces are defined for IP VLAN, they are 
virtual routing interfaces and are subject to the rules of STP.  

If your backbone is consisted of virtual routing interfaces all within the same STP domain, it is a 
bridged backbone, not a routed one.  This means that the set of backbone interfaces that are 
blocked by STP will be blocked for routed protocols as well.  The routed protocols will be able to 
cross these paths only when the STP state of the link is FORWARDING.  This problem is easily 
avoided by proper network design. 

When designing an ISR network, pay attention to your use of virtual routing interfaces and the 
spanning-tree domain.  If Layer 2 switching of your routed protocols (IP, IPX, AppleTalk) is not 
required across the backbone, then the use of virtual routing interfaces can be limited to edge 
switch ports within each router. Full backbone routing can be achieved by configuring routing on 
each physical interface that connects to the backbone.  Routing is independent of STP when 
configured on a physical interface. 

If your ISR design requires that you switch IP, IPX, or Appletalk at Layer 2 while simultaneously 
routing the IP protocol over a single backbone, then create multiple port-based VLANs and use 
VLAN tagging on the backbone links to separate your Layer 2 switched and Layer 3 routed 
networks.

Содержание Brocade DCX





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Brocade DCX

E-Trailer E-Switch Product Manual preview
E-Switch
Бренд: E-Trailer Страницы: 8
T1V ThinkHub Pro Quick Start Manual preview
ThinkHub Pro
Бренд: T1V Страницы: 2
DANLERS BMEXPIR Installation Notes preview
BMEXPIR
Бренд: DANLERS Страницы: 2
Accton Technology EtherHub-24s Quick Installation Manual preview
EtherHub-24s
Бренд: Accton Technology Страницы: 7
CIECO PCI-100LS Programming And Installation Manual preview
PCI-100LS
Бренд: CIECO Страницы: 17
Hall Research Technologies Genesis Digital HSM-04-02 User Manual preview
Genesis Digital HSM-04-02
Бренд: Hall Research Technologies Страницы: 28
IPGARD SDPN-2D Manual preview
SDPN-2D
Бренд: IPGARD Страницы: 15
Omega Engineering LVU-230 User Manual preview
LVU-230
Бренд: Omega Engineering Страницы: 16
Intellinet 560757 User Manual preview
560757
Бренд: Intellinet Страницы: 12
SmartThings STH-ETH-250 Quick Start Manual preview
STH-ETH-250
Бренд: SmartThings Страницы: 2
ATEN Master View CS-102 User Manual preview
Master View CS-102
Бренд: ATEN Страницы: 11
H3C S6800-54QT Installation, Quick Start preview
S6800-54QT
Бренд: H3C Страницы: 4
Theben TIMEGUARD IS3N-20 Installation & Operating Instructions preview
TIMEGUARD IS3N-20
Бренд: Theben Страницы: 2
EG Juniper EX Manual preview
Juniper EX
Бренд: EG Страницы: 22
UNICOM MicroGST/5 GEP-32005T User Manual preview
MicroGST/5 GEP-32005T
Бренд: UNICOM Страницы: 12
Woodward MPU Manual preview
MPU
Бренд: Woodward Страницы: 20
Xantech XT-HDBT-MX44-4K-KIT User Manual preview
XT-HDBT-MX44-4K-KIT
Бренд: Xantech Страницы: 12
N-audio Two Amps To Cabinet User Manual preview
Two Amps To Cabinet
Бренд: N-audio Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды