manualshive.com logo in svg

Dell Brocade DCX, Руководство по настройке

Поделиться
Скачать
Dell Brocade DCX Скачать руководство пользователя страница 1035

BigIron RX Series Configuration Guide

963

53-1001810-01

Configuring 802.1x port security

33

•

If the 

<vlan-name>

 string does not match the name of a VLAN, the device checks whether the 

string, when converted to a number, matches the ID of a VLAN configured on the device. If it 
does, then the client’s port is placed in the VLAN with that ID.

•

If the 

<vlan-name>

 string does not match either the name or the ID of a VLAN configured on 

the device, then  the client will not become authorized.

The show interface command displays the VLAN to which an 802.1x-enabled port has been 
dynamically assigned, as well as the port from which it was moved (that is, the port’s default VLAN). 
Refer to 

“Displaying dynamically assigned VLAN information”

 on page 975 for sample output 

indicating the port’s dynamically assigned VLAN.

Considerations for dynamic VLAN assignment in an 
802.1x multiple client configuration 

The following considerations apply when a Client in a 802.1x multiple client configuration is 
successfully authenticated, and the RADIUS Access-Accept message specifies a VLAN for the port:

•

If the port is not already a member of a RADIUS-specified VLAN, and the RADIUS Access-Accept 
message specifies the name or ID of a valid VLAN on the 

Brocade

 

BigIron RX

, then the port is 

placed in that VLAN.

•

If the port is already a member of a RADIUS-specified VLAN, and the RADIUS Access-Accept 
message specifies the name or ID of a different VLAN, then it is considered an authentication 
failure.  The port’s VLAN membership is not changed.

•

If the port is already a member of a RADIUS-specified VLAN, and the RADIUS Access-Accept 
message specifies the name or ID of that same VLAN, then traffic from the Client is forwarded 
normally.

•

If the RADIUS Access-Accept message specifies the name or ID of a VLAN that does not exist 
on the 

Brocade

 

BigIron RX

, then it is considered an authentication failure.

•

If the RADIUS Access-Accept message does not contain any VLAN information, the Client’s 
dot1x-mac-session is set to “access-is-allowed”.  If the port is already in a RADIUS-specified 
VLAN, it remains in that VLAN.

Disabling and enabling strict security mode for dynamic filter 
assignment

By default, 802.1x dynamic filter assignment operates in 

strict security mode

.  When strict security 

mode is enabled, 802.1x authentication for a port fails if the Filter-ID attribute contains invalid 
information, or if insufficient system resources are available to implement the per-user IP ACLs or 
MAC address filters specified in the Vendor-Specific attribute.

When strict security mode is enabled:

•

If the Filter-ID attribute in the Access-Accept message contains a value that does not refer to 
an existing filter (that is, a MAC address filter or IP ACL configured on the device), then the 
client will not be authenticated, regardless of any other information in the message (for 
example, if the Tunnel-Private-Group-ID attribute specifies a VLAN to which to assign the port).

•

If the Vendor-Specific attribute specifies the syntax for a filter, but there are insufficient system 
resources to implement the filter, then the port will not be authenticated.

•

If the device does not have the system resources available to dynamically apply a filter to a 
port, then the port will not be authenticated.

Содержание Brocade DCX





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды