manualshive.com logo in svg

Dell Brocade DCX, Руководство по настройке

Поделиться
Скачать
Dell Brocade DCX Скачать руководство пользователя страница 1048

976

BigIron RX Series Configuration Guide

53-1001810-01

Displaying 802.1x information

33

The following is an example of the show interface command indicating the port’s dynamically 
assigned VLAN.  Information about the dynamically assigned VLAN is shown in bold type.

In this example, the 802.1x-enabled port has been moved from VLAN 1 to VLAN 4094. When the 
client disconnects, the port will be moved back to VLAN 1. 

Displaying information on MAC address filters and IP ACLs on an 
interface

You can display information about the user-defined and dynamically applied MAC address filters 
and IP ACLs currently active on an interface.

Displaying MAC address filters applied to an 802.1x-enabled port

Use the show dot1x mac-address command to display information about MAC filters applied to an 
interface. If the MAC address filter is dynamically assigned by 802.1x, the display shows the 
following.

BigIron RX#show dot1x mac-address ethernet 1/1

Port 1/1 MAC Address Filter information:

  802.1x dynamic MAC Filter (user defined) :

    mac access-list 401 in

  Port default MAC Filter :

    mac access-list 400 in

The "Port default MAC Filter" appears if a default MAC filter has been configured on the port. This 
default MAC filter is the MAC filter that will be applied to the port once the dynamically assigned 
MAC filter is removed. If a default MAC filter has not been configured, the message "No Port default 
MAC   is displayed. 

BigIron RX# show interface e 12/2

GigabitEthernet1/3 is up, line protocol is up 

  Hardware is GigabitEthernet, address is 000c.dbe2.5800 (bia 000c.dbe2.5800)

  Configured speed auto, actual 100Mbit, configured duplex fdx, actual fdx

  Configured mdi mode AUTO, actual MDIX

 

 Member of L2 VLAN ID 4094 (dot1x-RADIUS assigned), original L2 VLAN ID is 1,

  port is untagged, port state is Forwarding

  STP configured to ON, Priority is level0, flow control enabled

  Force-DSCP disabled

  mirror disabled, monitor disabled

  Not member of any active trunks

  Not member of any configured trunks

  No port name

  Internet address is 12.12.12.250/24, MTU 1522 bytes, encapsulation ethernet

  300 second input rate: 810 bits/sec, 0 packets/sec, 0.00% utilization

  300 second output rate: 1253 bits/sec, 1 packets/sec, 0.00% utilization

  70178 packets input, 7148796 bytes, 0 no buffer

  Received 0 broadcasts, 0 multicasts, 70178 unicasts

  0 input errors, 0 CRC, 0 frame, 0 ignored

  0 runts, 0 giants, DMA received 70178 packets

  91892 packets output, 10081165 bytes, 0 underruns

  Transmitted 9853 broadcasts, 13330 multicasts, 68709 unicasts

  0 output errors, 0 collisions, DMA transmitted 91892 packets

Содержание Brocade DCX





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды