Dell Brocade DCX, Руководство по настройке

Страница: 1352 / 1436

1280 BigIron RX Series Configuration Guide
53-1001810-01
Configuring the Syslog service
A
The <facility-name> can be one of the following:
•
kern – kernel messages
•
user – random user-level messages
•
mail – mail system
•
daemon – system daemons
•
auth – security or authorization messages
•
syslog – messages generated internally by Syslog
•
lpr – line printer subsystem
•
news – netnews subsystem
•
uucp – uucp subsystem
•
sys9 – cron/at subsystem
•
sys10 – reserved for system use
•
sys11 – reserved for system use
•
sys12 – reserved for system use
•
sys13 – reserved for system use
•
sys14 – reserved for system use
•
cron – cron/at subsystem
•
local0 – reserved for local use
•
local1 – reserved for local use
•
local2 – reserved for local use
•
local3 – reserved for local use
•
local4 – reserved for local use
•
local5 – reserved for local use
•
local6 – reserved for local use
•
local7 – reserved for local use
Displaying the interface name in Syslog messages
By default, an interface’s slot number (if applicable) and port number are displayed when you
display Syslog messages. If you want to display the name of the interface instead of its number,
enter the following command.
BigIron RX(config)# ip show-portname
This command is applied globally to all interfaces on the BigIron RX.
Syntax: [no] ip show-portname
When you display the messages in the Syslog, you see the interface name under the Dynamic Log
Buffer section. The actual interface number is appended to the interface name. For example, if the
interface name is "lab" and its port number is "2", you see "lab2" displayed as in the example below.
BigIron RX# show logging
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
Buffer logging: level ACDMEINW, 3 messages logged
level code: A=alert C=critical D=debugging M=emergency E=error
I=informational N=notification W=warning