Dell 5230, Руководство пользователя

Страница: 96 / 193

Menu item Description
Portrait Width
3–14 inches
76–360 mm
Sets the portrait width
Notes:
•
If the width exceeds the maximum, the printer uses the maximum
width allowed.
•
8.5 inches is the US factory default setting. Inches can be increased
in 0.01-inch increments.
•
216 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.
Portrait Height
3–14 inches
76–360 mm
Sets the portrait height
Notes:
•
If the height exceeds the maximum, the printer uses the maximum
height allowed.
•
14 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.
•
356 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.
Feed Direction
Short Edge
Long Edge
Specifies the feed direction if the paper can be loaded in either direction
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only if the longest edge is shorter than the
maximum width supported in the tray.
Bin Setup menu
Menu Item Description
Output Bin
Standard Bin
Bin <x>
Specifies the default output bin
Note: Standard Bin is the factory default setting.
Configure Bins
Mailbox
Link
Mail Overflow
Link Optional
Type Assignment
Specifies configuration options for output bins
Notes:
•
Mailbox is the factory default setting.
•
Bins assigned the same name are automatically linked
unless Link Optional is selected.
•
The Mailbox setting treats each bin as a separate
mailbox.
•
The Link setting links together all available output
bins.
•
The Link Optional setting links together all available
output bins except the standard bin and only appears
when at least two optional bins are installed.
•
The Type Assignment setting assigns each paper type
to an output bin or linked bin set.
Understanding printer menus
96