Dell 5230 Скачать руководство пользователя

Страница: 157 / 193

Check tray <x> connection

Try one or more of the following:

•

Turn the printer off and then back on.

If the error occurs a second time:

Turn the printer off.

Unplug the power cord from the wall outlet.

If an optional duplex unit is installed, then remove it.

Remove the indicated tray.

Reattach the tray.

Connect the power cord to a properly grounded outlet.

Restart the printer.

If the error occurs again:

Turn the printer off.

Unplug the power cord from the wall outlet.

Remove the tray.

Contact Customer Support.

•

Press the up or down arrow button until

Continue

appears, and then press

to clear the message and print

without using the tray.

Close door <x>

Close the specified door.

Close door or insert cartridge

The cartridge is missing or not installed correctly. Insert the cartridge, and then close all doors and covers.

Close finisher side door

Close the finisher side door to clear the message.

Close finisher top cover

Close the finisher top cover to clear the message.

Disk Corrupted

The printer attempted to recover a disk, but was not able to do so.

Format Disk

appears. Press

to reformat the

disk.

Note:

Reformatting the disk deletes all the files currently stored on the disk.

Insert tray <x>

Insert the specified tray into the printer.

Troubleshooting

157

Содержание 5230


































































































































































































Результаты поиска

Содержание 5230

Отзывы:

Похожие инструкции для 5230

Бренды по названию

Популярные бренды

Dell 5230, Руководство пользователя

Результаты поиска

Содержание 5230

Отзывы:

Похожие инструкции для 5230

Бренды по названию

Популярные бренды