Dell 5230 Скачать руководство пользователя

Страница: 135 / 193

Recycling Dell products

To return Dell products for recycling:

Visit our Web site at

www.dell.com/recycling

Select your country from the list.

Follow the instructions on the computer screen.

Moving the printer

Before moving the printer

Remove all printer options before moving the printer.

CAUTION—POTENTIAL INJURY:

The printer weight is greater than 18 kg (40 lb) and requires two or more

trained personnel to move it safely.

CAUTION—POTENTIAL INJURY:

Before moving the printer, follow these guidelines to avoid personal injury

or printer damage:

•

Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.

•

Disconnect all cords and cables from the printer before moving it.

•

Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the
same time.

Note:

Use the handholds located on both sides of the printer to lift it off the optional drawer.

Warning—Potential Damage:

Damage to the printer caused by improper moving is not covered by the printer

warranty.

Moving the printer to another location

The printer and options can be safely moved to another location by following these precautions:

•

Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart
used to move the options must have a surface able to support the dimensions of the options.

•

Keep the printer in an upright position.

Maintaining the printer

135

Содержание 5230


































































































































































































Результаты поиска

Содержание 5230

Отзывы:

Похожие инструкции для 5230

Бренды по названию

Популярные бренды

Dell 5230, Руководство пользователя

Результаты поиска

Содержание 5230

Отзывы:

Похожие инструкции для 5230

Бренды по названию

Популярные бренды