Dell 5230 Скачать руководство пользователя

Страница: 142 / 193

Place the toner cartridge aside on a flat, smooth surface.

Warning—Potential Damage:

Do not leave the cartridge exposed to light for extended periods.

Warning—Potential Damage:

The jammed paper may be covered with unfused toner which can stain garments

and skin.

Remove the jammed paper.

CAUTION—HOT SURFACE:

The inside of the printer might be hot. To reduce the risk of injury from a hot

component, allow the surface to cool before touching.

Note:

If the paper is not easy to remove, then open the rear door and remove the paper from there.

Align and reinstall the toner cartridge.

Close the front cover.

Close the multipurpose feeder door.

Press

201 paper jam

Push the release latch, and then lower the multipurpose feeder door.

Push the release latch, and then open the front cover.

Lift and pull the toner cartridge out of the printer.

Warning—Potential Damage:

Do not touch the photoconductor drum on the underside of the cartridge. Use

the cartridge handle whenever you are holding the cartridge.

Clearing jams

142

Содержание 5230


































































































































































































Результаты поиска

Содержание 5230

Отзывы:

Похожие инструкции для 5230

Бренды по названию

Популярные бренды

Dell 5230, Руководство пользователя

Результаты поиска

Содержание 5230

Отзывы:

Похожие инструкции для 5230

Бренды по названию

Популярные бренды