Dell 5230 страница 166 Скачать руководство пользователя

Страница: 166 / 193

Remove the extra disks.

Connect the power cord to a properly grounded outlet.

Turn the printer back on.

58 Too many flash options installed

Too many optional flash memory cards or too many optional firmware cards are installed on the printer.

Try one or more of the following:

•

Press the up or down arrow button until

Continue

appears, and then press

to clear the message and

continue printing.

•

Remove extra flash options:

Turn the printer off.

Unplug the power cord from the wall outlet.

Remove extra flash options.

Connect the power cord to a properly grounded outlet.

Turn the printer back on.

58 Too Many Trays Attached

•

Turn the printer off.

•

Unplug the power cord from the wall outlet.

•

Remove the excess trays.

•

Turn the printer back on.

59 Incompatible Duplex

Only options designed specifically for this printer are supported.

Try one or more of the following:

•

Remove the duplex unit.

•

Press the up or down arrow button until

Continue

appears, and then press

to clear the message and

continue printing without using the duplex unit.

59 Incompatible envelope feeder

Only options designed specifically for this printer are supported.

Try one or more of the following:

•

Remove the envelope feeder.

•

Press

to clear the message and continue printing without using the envelope feeder.

59 Incompatible output bin <x>

Only options designed specifically for this printer are supported.

Troubleshooting

166

Содержание 5230


































































































































































































Результаты поиска

Содержание 5230

Отзывы:

Похожие инструкции для 5230

Бренды по названию

Популярные бренды

Dell 5230, Руководство пользователя

Результаты поиска

Содержание 5230

Отзывы:

Похожие инструкции для 5230

Бренды по названию

Популярные бренды