DELEX DSI ES8300, Инструкция по установке и эксплуатации

Страница: 17 / 39

17
DESIGNED SECURITY INC 800-272-3555 www.dsigo.com
1402 Hawthorne Street Bastrop, Texas 78602 Fax 512 321 9181
Email: dsi@dsigo.com
INS8300
COMPONENT DESCRIPTION
Electronics Package
The Electronics are found in the left-hand pedestal end as seen when facing the B-Side of
the bollard. (A-side holds the #2 Motor and reflectors for the lane.)
The Motor Controllers control the local and remote barriers. These are mounted
immediately above the bridge panel.
The PLC (Programmable Logic Controller) is the Module mounted on the DIN Rail at the top of
the Electronics Package. The PLC controls the barriers by reading Encoder position information
and communicating barrier movement information to the Motor Controllers in response to
PLC inputs.
Sensors
The C1, 2 & 3 Sensors are used to detect objects present in the barrier path on the un-secure
side of the lane. If something is blocking these beams, the barriers will not move to allow a user
to exit from the secure side (although the barriers may always be pushed open in an emergency).
The D1, 2 & 3 Sensors work similarly for users exiting from the secure side (IE: blocking this beam
will prevent the barriers from moving) and, in addition these sensors will detect the presence of an
exiting user, when in “Free Exit” mode, and tell the PLC to move the barriers to allow egress.
PLC Controller
The PLC (Programmable Logic Controller) is made up of several modules. All Inputs terminate
here and all Outputs originate here. The operating software runs on the PLC.
Wall and Bridge Connection Panels
The Wall is a panel located opposite the Bridge Panel. All wiring for the lane’s local
components goes through the Wall panel; including Motor 1 ; Encoder 1 ;
optional Lock Solenoid; and all Sensor connections.
The Bridge is a panel located at the lower part of the Electronics Module. All Input and Output
Wiring and Remote; Motor 2, Encoder 2, optional Lock Solenoid, and Graphic Array cabling
terminates on the Bridge.
Additional detail regarding the Bridge panel and connectors is found in the Wiring section.