DELEX DSI ES8300, Инструкция по установке и эксплуатации

Страница: 33 / 39

33
DESIGNED SECURITY INC 800-272-3555 www.dsigo.com
1402 Hawthorne Street Bastrop, Texas 78602 Fax 512 321 9181
Email: dsi@dsigo.com
INS8300
SPECIFICATIONS
Power: 24-26 VDC @ 4 Amps per walkway
Wiring: Power- Less than 50 feet; -14 Gauge
50 to 100 feet; -12 Gauge
(See Power Wire Gauge calculator on page 34 for detail)
Signal- 50 to 200 feet; -22 Gauge
Inputs: N/O Dry Contact for - Valid Entry Card (from Access Cntrl)
N/O Dry Contact for - Valid Exit Card (from Access Cntrl)
N/O Dry Contact for - Invalid Card (from Access Cntrl)
N/O Dry Contact for - Bypass/Reset/Override
N/O Dry Contact for - Entry or Exit Closed
N/O Dry Contact for - Arm Disable
N/O Dry Contact for - Free Exit
N/O Dry Contact for - Emergency (Fire Alarm)
N/O Dry Contact for - Voice Enable (Factory Option)
Outputs: Output relays are rated for 1A @ 5-30 VDC
Output relays may optionally be N/C, see Page 16
N/O Dry Contact for - Alarm
N/O Dry Contact for - Time Out
N/O Dry Contact for - Valid Passage
N/O Dry Contact for - Bypass
N/O Dry Contact for - Invalid Card
Accessory Power - 12 Vdc @ 2Amps
Audible Alarm: 80db at 3 feet (Disable by shorting Voice Enable input)
Timing
Adjustments: Card Access (0-30 Seconds timeout if no passage)
Alarm Auto-Reset (0-30 Seconds timeout for Alarm sounder)
Dimensions: 8"W X 38"H X 54"L
Walkway Spacing: Standard / A.D.A. - 36” between Bollards
Custom Lane Widths may differ from Standard
Mounting: 12 Gauge Steel base (2 pedestals) with (8) 7/8” (.875”) Mounting
Holes and (2) 6" X 5" Cable Access Holes per Bollard
Interconnect Cables: Encoder2 15’
Motor2: 15’
Exit Light Arrays: 15’ ea.
(2 Exit Light Array cables - 1 Horizontal and 1 Vertical array cable)
Locking Solenoid (optional): 15’
WARNING:
Multiple lanes shar-
ing a common Input Source must
be isolated through a unique relay
contact for each lane input. Wiring
common inputs in a daisy-chain
(parallel) can cause damage to
electronics.