DELEX DSI ES8300, Инструкция по установке и эксплуатации

Страница: 23 / 39

23
DESIGNED SECURITY INC 800-272-3555 www.dsigo.com
1402 Hawthorne Street Bastrop, Texas 78602 Fax 512 321 9181
Email: dsi@dsigo.com
INS8300
POWER CONNECTOR

Connect 4 Amp 24 VoltDC Power
Supply to the “24VDC POWER
INPUT” connector. Pin 1 is “+”.

See page 34 for Power Wire Gauge
Calculator to determine proper gauge
for your application.

Use WAGO™ Tool to install wire in
removable connector (provided).
ON/OFF CIRCUIT BREAKER

This thermal circuit breaker will trip if
current rating is exceeded. Allow to
cool before resetting.

Voltage Drop over long cable run from
Power Supply may create a high
current condition that trips the
breaker. Use appropriate gauge wire
for your installation.
LIGHT ARRAY CONNECTIONS

Entry (local) and Exit (adjacent)
Horizontal and Vertical Light Array
connections.
INPUT AND OUTPUT CONNECTIONS

Install all Input and Output wiring to
WAGO™ Connectors (provided).

Use WAGO™ Tool to install wire.

WARNING:
Multiple lanes
sharing a common Input Source
must be isolated through a unique
relay contact for each lane input.
Wiring common inputs in a daisy-
chain (parallel) can cause damage
to electronics.
ADJACENT BOLLARD INTERCONNECTIONS

MOTOR 2

ENCODER 2

EXIT LIGHT ARRAYS (Horizontal and Vertical)

LOCKING SOLENOID CONNECTION (optional)
BRIDGE PANEL DETAIL