2. Connect the elements on the logic grid to the left vertical rail and/or to each other by dragging and dropping elements
from the
Design tools
menu to the desired locations on the logic grid. All elements that are placed on the logic grid must
have a connection to the left vertical rail.
• The connection to the left vertical rail can be direct, by placing the element in the first column to the right of the left
vertical rail.
• The connection to the left vertical rail can be indirect, by connecting the element to another element that is connected to
the rail or by connecting the element to the rail with connectors.
3. Select
Write
from the right side panel to write the configuration to the controller.
INFO
Elements placed on the logic grid can be moved around on the grid. However, it is not possible to move an element
from one
Block
to another
Block
.
9.4.4 Configure a CustomLogic element
1. Select an element on the logic grid to open the
Element setup
menu for that element. Alternatively open the
Element
setup
menu and select the desired element. The
Element setup
menu contains:
• A description of the element.
• A list of all the internal variables that are used in the project.
PPM 300 PICUS manual 4189341080 UK
www.deif.com
Page 119 of 213
