b. Select
Add
under
Project overview > Project
to add a new
Section
to the
Project
.
c. Configure the
Section's
properties under
Project overview > Properties
.
•
4. Add a
Block
to the selected
Section
.
a. Select the
Section
that you want to add a
Block
to.
b. Select
Add
under
Project overview > Project
to add a new
Block
to the
Project
.
c. Configure the
Block's
properties under
Project overview > Properties
.
•
5. Additional
Blocks
can be created by repeating step 4.
6. Select
Write
from the right side panel to write the project to the controller.
9.4.3 Create a logic line with CustomLogic elements
1. Drag and drop elements from the
Elements
menu to the desired locations on the logic grid.
• Contacts and all function blocks can be placed in columns 1 to 11 of the logic grid.
• Coils can only be placed in column 12.
PPM 300 PICUS manual 4189341080 UK
www.deif.com
Page 118 of 213