2. Select the parameter setting or alarm setting you wish to change on the right.
•
• The current and default values are shown under
Info
for the selected setting.
◦
3. Change the settings as needed, within the allowed range.
4. You can change as many parameters as necessary, before writing the settings to the controller.
5. The settings must be written to the controller to take effect.
INFO
Should you need to revert to the previously saved settings, select
Refresh
to reload all the settings.
Reloading the parameter settings overwrites the parameters in PICUS with the parameters from the controller. You
will therefore lose any changes that were not written to the controller.
Write the parameters
1. Select
Write
, from the right side panel, to write the parameters to the controller.
• A notification is shown for confirmation of the action.
PPM 300 PICUS manual 4189341080 UK
www.deif.com
Page 106 of 213
