15
Danger!
Electric shock risk!
Do not use extension cables between the plug-in mains adapter and the
mains socket.
y
Insert the plug-in mains adapter into a mains socket (with earth terminal) located
away from the wet area. Use a residual current circuit breaker. (See above,
Re-
quirements for the plug-in mains adapter, P. 14
). The last selected operating mode
is activated (see
Operating principle "passive mode", P. 9
,
Operating principle "Ac-
tive mode", P. 8
,
System settings, P. 20
.
y
If the cable is too short, have an additional mains socket (with residual current
circuit breaker and earth terminal) fitted outside the wet area by an approved
electrician.
4.2
Determining the installation position for the pool sensor
A single sensor (
BAS
STD
) can be used to monitor pool sizes of up to 50 m
2
; 2
sensors (
PRO
) will cover pools of up to 100 m
2
.
Pool sensor symbol
Fig. 4
BAS
STD
Pool sensor positioning examples
Fig. 5
PRO
Pool sensor positioning examples
