26
7
Using the System
This section describes the optimum use of the system in day-to-day operations.
Activate the “Active mode”or “Passive mode”. See
7.1 Using active mode, page 26
and
5.3 Activating the "Passive mode", page 19
STD
PRO
Putting the radio alarm dongle into operation,
see page 30.
7.1
Using active mode
(with monitoring bracelet)
7.2
Preparations
y
Ensure that the system is connected to the power supply.
y
Activate active mode
see page 18
.
y
Test the system (see
Testing active mode, P. 28
).
y
Check the monitoring bracelet (see
Monitoring bracelet, P. 32
).
y
Ensure that all persons in the swimming pool area are wearing a moni-
toring bracelet.
7.3
Alarm (active mode)
Button
STD
PRO
The radio alarm is triggered,
see page 30.
The red LED on the monitoring bracelet flashes (alarm has been sent).
Warning
!
Risk of drowning!
y
Initiate rescue immediately alarm activates.
y
Find the person in distress and recover that person immediately.
y
Commence lifesaving actions.
y
Call for medical assistance.
Turn siren off
y
The siren can be deactivated by pressing any button on the alarm box.
y
If no button has been pressed, all alarms will be cancelled 10 seconds after the
monitoring bracelet has been taken out of the water.
You will find further details on active mode in section
Operating principle "Active
mode", P. 8.
