background image

12

Using the System for the First Time

 

y

Read the installation and operating instructions. 

 

y

Charge the monitoring bracelet battery, see 

Charging the monitoring bracelet’s 

battery, P. 33.

 

y

Install the BlueFox Control software, see 

Installing the BlueFox Control software, 

P. 37.

 

y

Configure the monitoring bracelet for system test (alarm depth 5 cm, alarm time 
5 sec.), see 

Programming the alarm depth and time, P. 34.

 

y

PRO

 The supplied test unit can be used for the test.

 

y

Install and connect the alarm box, see 

Installing and connecting the alarm box, 

P. 13.

 

y

Determine the location for installing the pool sensor, 

see page 15

 

y

Check the pool sensor position, see 

Testing active mode, P. 28.

 

y

Fit the the pool sensor (

PRO

 pool sensors), see 

Fitting the pool sensor, P. 16.

 

y

Fix the pool sensor cable.

 

y

STD

 

PRO

 Putting the radio alarm dongle into operation, 

see page 30

 

y

Configure a monitoring bracelet for each person using the swimming pool, see 

Programming the alarm depth and time, P. 34.

 

y

Start using the BlueFox system, see 

Using the System, P. 26.

Содержание Basic





















































Отзывы: