28
Warning
!
Risk of drowning because the BlueFox system is not monitoring the pool.
In the case of an alarm and/or if the passive mode LED is flashing, Blue-
Fox is not monitoring the pool. The pool must be monitored by a person.
The alarm can be deactivated by pressing any button on the alarm box.
If no button is pressed, the alarm will be cancelled 6 minutes after the alarm was
activated.
As soon as the waves have subsided, the passive mode LED will illuminate per-
manently. Further details about passive mode can be found in section
Operating
principle "passive mode", P. 9.
8
Testing active mode
Caution!
Risk of hearing damage caused by the sound pressure level from the
siren! Wear hearing protection; keep children away from the siren.
Immediately remove the test monitoring bracelet from the water once
the alarm has activated.
y
Configure the monitoring bracelet for system test, see
Programming the alarm
depth and time, P. 34.
y
PRO
The supplied test unit can be used for the test.
y
Activating the "Active mode" (
see page 18).
y
Hold the test monitoring bracelet in the swimming pool long enough for the
siren to sound.
y
STD
PRO
Radio alarm dongle: Flashes white, buzzer sounds.
y
Remove the test monitoring bracelet from the water. The alarm will be cancelled
automatically.
y
Repeat the test at various locations in the swimming pool (recesses, corners).
y
If the test is only partially successful or if the test fails: See
Troubleshooting, P. 42
