16
4.3
Fitting the pool sensor
25 c
m
Swimming pool
Water surface
1
0.
8 f
t
The pool sensor must be fitted to the
pool wall 25 cm /0.8 ft beneath the
water surface (
PRO
2 pool sensors).
It is not necessary to reduce the water
depth in order to fit the sensor. The
supplied adhesive can be used under-
water.
y
Do not fit the pool sensor close to
inlet jets, countercurrent systems or
air jet nozzles.
Fig. 6
Positioning the pool sensor
SENSOR
SE
N
SO
R
SE
N
SO
R
3
y
Ensure that the plug on the pool sensor cable is dry.
y
Connect the pool sensor cable to the alarm box and
screw tight
3
.
y
If the pool sensor cable is too short: use an extension
cable (see
Optional Accessories, P. 49
).
Fig. 7
Connecting the pool sensor to the alarm box
y
Check the position of the pool sensor, see
Testing active mode, P. 28.
y
If test fails: Check the position of the pool sensor and test again.
Following successful test:
y
Mark the position of the pool sensor in the swimming pool.
y
Take the pool sensor out of the water.
