Milliard Brands © 2018 All Rights Reserved.
Advanced Balance Beam
Please
read
the
following instructions
entirely
before
attempting to use or
assemble the balance beam for the
first time. Failure to follow
instructions may lead to injury.
PRECAUTIONS
ALWAYS
inspect and test the balance beam before use. Do not use if there is damage, wear, or loose parts.
ALWAYS
use the beam with controlled movements and balance to avoid injury or damage to surroundings.
ALWAYS
protect the balance beam from humidity to maximize service life.
ALWAYS
contact the manufacturer or a qualified professional to arrange for proper repair.
ONLY
use the balance beam with a padded mat in place below the bar to prevent accidents or injuries.
ONLY
use the balance beam for gymnastics training purposes. It is not designed for other uses.
ONLY
clean the balance beam with mild soap and a damp cloth if necessary. Use no solvents.
ONLY
use this equipment with properly trained, qualified persons under supervised conditions.
NEVER
attempt advanced techniques with a balance beam before completing adequate training.
NEVER
allow small children on or near the balance beam. It is not a toy.
NEVER
continue training if you experience significant pain or discomfort during use to avoid further injury.
NEVER
attempt to repair or modify damaged or worn components yourself.
PARTS
(A)
Balance Beam
X1
(B)
Leg Bars
X2
(C)
Rubber Feet
X4
(D)
Height Adjustment Knob
X2
(E)
Upper Leg Support
X2
(F)
Lower Leg Support
X2
(G)
Hex Wrench
X1
(H)
Base Bar Retention Bolts
X16
(I)
Bolt Washers
X16 each
WARNING:
•
This product is for gymnastics use only.
•
Do not use a partially-assembled balance beam.
•
Not intended for commercial use.
•
Do not exceed total weight capacity of 150lbs.
•
Do not use balance beam if damaged.
•
Perform only on a flat, level surface.
