Prepare Instrument for Use
Initial inspection
When you receive your power supply, inspect it for any obvious damage that may have occurred during shipment. If
there is damage, notify the shipping carrier and nearest Keysight Sales and Support Office immediately. Refer to
Until you have checked out the power supply, save the shipping carton and packing materials in case the unit has to
be returned. Check the list under
and verify that you have received these items with your
instrument. If anything is missing, please contact your nearest Keysight Sales and Support Office.
Standard shipped items
– Keysight E36154A/E36155A autoranging DC power supply
– AC power cord
– Certificate of calibration
– One 10 A, 3.5 mm female 4-pin terminal connector (P/N: 0360-3139)
– One 8 A, 3.5 mm female 2-pin terminal connector (P/N: 0360-3191)
– One 80 A detachable binding post assembly (P/N: E36154-60003)
Documentation and firmware revisions
The Keysight E36150 Series documentation listed below can be downloaded for free through our website at
www.keysight.com/find/e36150manuals
– Keysight E36150 Series Autoranging DC Power Supplies User's Guide. This manual.
– Keysight E36150 Series Autoranging DC Power Supplies Programming Guide.
– Keysight E36150 Series Autoranging DC Power Supplies Service Guide.
For the latest firmware revision and firmware update instruction, go to
www.keysight.com/find/e36150firmware
Recommended calibration interval
Keysight Technologies recommends a one-year calibration cycle for the E36150 Series autoranging DC power
supplies.
26
Keysight E36150 Series User's Guide
