From the remote interface:
To select the Arb Shape:
ARB:FUNC:SHAP UDEF
To configure the List voltage with 1 V, 2 V, 3 V, 4 V and 5 V:
ARB:VOLT:UDEF:LEV 1,2,3,4,5
To configure the List current with 0.1 A, 0.2 V, 0.3 A, 0.4 A and 0.5 A:
ARB:CURR:UDEF:LEV 0.1,0.2,0.3,0.4,0.5
To configure all the List time with 1 s:
ARB:UDEF:DWEL 1,1,1,1,1
To enable all the List BOST:
ARB:UDEF:BOST 1,1,1,1,1
To disable all the List EOST:
ARB:UDEF:EOST 0,0,0,0,0
To set the voltage mode to Arb:
VOLT:MODE ARB
To set the current mode to Arb:
CURR:MODE ARB
To set the trigger source to Key/Immediate:
TRIG:SOUR IMM
To enable the output:
OUTP ON
To initiate and run the list:
INIT:TRAN
Keysight E36150 Series User's Guide
81
