– Output 1: 0.1 s
Step 3 - Configure the Scope View traces
– Check V1.
– Press Knob Scale and use the Vertical knob to set V1 to 1 V/Div.
– Press Knob Ofs and use the Vertical knob to set offset to 2 V.
– Press Knob Scale and use the Horizontal knob to set the timebase to 20 ms.
Step 4 – Configure the Scope properties:
Press Properties to configure the scope properties as follows:
– Press Settings > Trigger Source > On/Off to select On/Off key as a trigger source. Press Back to return to Set-
tings menu.
– Press Trigger Mode >Single to display a single sweep measurement. Press Back twice to return to the Scope
Properties menu.
– Set the Time Reference to Left in Horizontal Settings (Hr) window: Press Settings > Time Ref Lf.
Step 5 – Turn on the outputs and measure the voltage:
Press the [Scope/Datalog] key to return the display the to scope view:
Keysight E36150 Series User's Guide
131
