Self-Test
Self Test verifies proper instrument operation.
Self-Test Procedures
A power-on self-test occurs automatically when you turn on the power supply. This limited test assures you that the
power supply is operational.
Press Utilities > Test / Setup > Self Test to perform the complete self-test of the power supply. It takes approximately
2 seconds for the self-test to complete.
You can also perform a complete self-test from the remote interface, see the
E36150 Series Programming Guide
for
details.
– If the self-test is successful, "Self test passed" is displayed on the front panel.
– If the self-test fails, "
!Err
" is displayed on the front panel. Record the error code and message and contact Keysight
support if necessary.
– If the self-test is successful, this indicates a high chance that the power supply is operational.
User Settings
User Settings specifies user preferences that control how the user interacts with the instrument. These settings are
stored in non-volatile memory.
Sound Settings
Beeper enables or disables the beeper sound when an error is generated from the front panel or remote interface.
Key Click enables or disables the click heard when a front-panel key or softkey is pressed.
Keysight E36150 Series User's Guide
151
