Front panel at a glance
Item
Description
1
Information-packed, high contrast 4.3-inch LCD color display; easily viewable even from sharp angles
2
Voltage and Current knobs
Set the output voltage and current. These knobs are active in Meter View, Scope View, Data Logger View, and Source Settings page.
3
Meter View, List Run/Stop, and Scope/Datalog keys
– [Meter View] turns on the meter view
– [List Run/Stop] runs or stops the Arb. This key is equivalent to Arb Run/Stop key as described in the manual.
– [Scope/Datalog] toggles between Scope view and Data Logger view.
4
Navigation keys.
– Navigate through the control dialog windows; press [Enter] key to select a control.
5
Numeric keypad
– Enters numeric values. Press [Enter] key to complete the entry.
– Deletes the values entered into the dialog using the back key.
6
Output On key
Turns the output On or Off; output is on when the key is lit.
7
Output terminals
8
On/Standby key and LED indicator
Turns on the instrument. If the LED is amber, the instrument is in standby mode with AC inlet power connected, and if it is green, the
instrument is on.
9
Sense terminals
10
Earth ground reference
11
Softkeys
Accesses the soft front panel menu.
12
USB port
Allows an external USB drive to be connected to the instrument.
NOTE: The USB cable is not recommended to be longer than 3 meters.
Keysight E36150 Series User's Guide
17
