Datascope Passport 2, Руководство по обслуживанию

Страница: 73 / 155

Passport 2®/Passport 2 LT™ Service Manual 0070-10-0441 3 - 7
Repair Information Troubleshooting Guidelines
3.3 Troubleshooting Guidelines
1. Identify the problem - Due to the wide variety of potential symptoms certain
problems may be more subtle than others. One approach to trouble shooting is to set up
the instrument as described in Chapter 7. Following the guidelines of the tests will help
determine the problem if one exists.
2. Avoid shorting component leads together - During repair procedures, it can
become tempting to make a series of quick measurements. Always turn the power off
before connecting and disconnecting the test leads and probes. The accidental shorting
of leads can easily stress the components and cause a second failure (aside from the
safety risk).
3. Use the Proper equipment - This equipment listed below is suggested to fulfill a
wide range of troubleshooting requirements. It is imperative to use the designated
equipment in order to ensure proper results of any and all test procedures.
4. Clean up the repair area - After any repair especially after any soldering or
desoldering clean off the repair area with alcohol and a stiff hairbrush. This will remove
any residual solder flux inturn allowing the instrument to return to its original neat
appearance.
3.4 Exchange Programs
An exchange program for certain assemblies in the instrument is available. In many cases
replacement of the complete assembly will result in the most expedient repairs.
3.5 Special Tools Required
• DVM
• Digital Mercury Manometer - 0 to 300 mmHg
• Safety Analyzer - Dempsey model or Equivalent
• Patient Simulator
• Flow Meter
• Test Chamber / Dummy Cuff – P/N 0138-00-0001-01 (700 cc) or -03
(500 cc)