Datascope Passport 2, Руководство по обслуживанию

Страница: 145 / 155

Passport 2®/Passport 2 LT™ Service Manual 0070-10-0441 7 - 3
Preventive Maintenance Care And Cleaning Of The Monitor
7.7 Care And Cleaning Of The Monitor
The monitor enclosure may be cleaned with a mild soap and water solution, isopropyl
alcohol, 10% bleach and water solution or ammoniated window cleaner. Apply cleaning
solution to the cloth, not directly onto the monitor. DO NOT apply large amounts of liquid.
DO NOT use abrasive cleaning agents or organic solvents.
WARNING: Do not clean the monitor while it is on and/or plugged in.
To prevent scratches on the front panel display screen, blow or carefully brush dust and dirt
particles with a soft sponge moistened with cleaner solution or a fine, soft-hair brush. DO
NOT use abrasive cleaning materials. Fingerprints and stains may be removed by using a
liquid lens cleaner and a soft cloth. DO NOT wipe a dry screen or use alcohol or chlorinated
hydrocarbon solvents.
7.8 Care and Cleaning of SpO
2
Sensor
NOTE: Refer to the individual instruction sheets packaged with
each sensor.
1. Check sensors and cables for wear or damage daily. Replace as required.
2. Check for proper operation of the spring mechanism on reusable adult sensors.
3. Sensors should be cleaned before and after use on each patient.
4. Clean and disinfect the sensors by wiping the patient contact area with a soft cloth
dampened with a mild soap and water solution or isopropyl alcohol. Hydrogen
peroxide can be used to remove dried blood on all accessible surfaces.
5. DO NOT immerse sensors. Let sensors dry completely before using.
CAUTION: When cleaning sensors do not use excessive amounts of
liquid. Wipe the sensor with a soft cloth, dampened with the
cleaning solution.
7.9 Cleaning CO
2
Sensors, Adapters And Sampling
Components
Oridion CO
2
patient monitoring accessories are designed for single patient use and should
not be cleaned or reused.