Datamax Prodigy, Руководство оператора

Страница: 100 / 146

________________________________________________________
__
Page - 92
Using the Printer's Internal Labeling Software
Enter up to a 4-digit number for the desired vertical placement of
your field, followed by the RETURN key. If the measurement you
have entered is acceptable, the prompt moves to the COL position.
If the measurement you select is too large for the given space or the
capability of the Printer, the following error message will appear:
NUMBER OUT OF RANGE
You will have to re-enter the data.
When specifying measurements, always measure to the bottom of
the field. For example, if using font “6”, the measurement will be to
the bottom of the alphanumeric letters. If using a bar code, the
measurement will be to the bottom of the bar code’s human
readable line. If the bar code you are printing does not have a
human readable line, measure to the bottom of the bars.
When rotating a bar code or alphanumeric field, the ROW
measurement is specified as the amount of space from the starting
point of the label to the top of the field (wherever you want printing
to begin).
10. The 4-digit COLUMN number tells the Printer “how far over” from
the left edge of the label data is to be printed. Enter the number for
this field, then press the RETURN key. If the measurement is
acceptable, the prompt moves to the TYPE position. If the
measurement is too large for the given space or the capability of the
Printer, the NUMBER OUT OF RANGE error message will appear
and you will have to re-enter your data. The cursor moves to the
TYPE position.