Datamax Prodigy, Руководство оператора

Страница: 57 / 146

________________________________________________________
__
Using the Printer Page - 49
4.4 System Level Commands (continued)
COMMAND DESCRIPTION
Kbaaaa Change memory (TEST MODE COMMAND).
b = Bank address.
aaaa = 4-digit address.
L ENTER LABEL FORMATTING COMMAND input
mode. After entering LABEL FORMATTING mode,
the Printer expects FIELD RECORD definition and
LABEL FORMATTING commands until command
“E” or “X” is received.
Mnnnn Set maximum label length. ( 0.01" steps) which is used
for paper out sensing.
nnnn = 4 digits.
Max setting 9999 = 99.99 inches.
Default setting = 1200.
m Set METRIC flag. All parameters passed to the Printer
that make reference in this manual to be by 0.01" will
now reference 1 mm steps instead. All reference to
measurement will be metric values until the Printer is
reset.
N Switch from Standard Input mode to Stand-alone
Batch System.
Onnnn Set form edge offset.
nnnn = 4 digits for offset.
where 250 is the “zero” setting.
Settings below 50 are adjusted back to 250.
P When this command is received, the Printer enters the
“monitor” (self test) mode. Reset Printer to return to
normal operation.
QaCLEAR Clear memory module bank.
a = Memory Module Bank A, B, or C.
Rnnn Remove graphics images from memory module.
nnn = name of image up to 8 characters.
STEST Module Memory Test. You must have a CRT terminal
connected to the Printer’s communication port to
answer testing questions and to receive results.