Datamax Prodigy, Руководство оператора

Страница: 97 / 146

________________________________________________________
__
Using the Printer's Internal Labeling Software Page - 89
3. Enter up to a 16-character alphanumeric name for this label,
followed by the RETURN key. The message “NEW LABEL
FORMAT?” appears. Answer “Y” for yes or “N” for no. If yes, the
operation moves to the ROT position. If the cursor won’t proceed
past the “NEW LABEL FORMAT” position, the memory module’s
“write protect” switch is ON. Turn it OFF to continue.
4. The Printer can print fonts, bar codes, and graphics at 0, 90, 180, or
270 degrees rotation. Valid responses to the ROT prompt are:
1 = 0 degrees
2 = 90 degrees
3 = 180 degrees
4 = 270 degrees
5. In the FNT position, enter the type of font you want to print. This
can be an alphanumeric font or a bar code. Enter one of the
following:
a.
An alphanumeric font type, followed by the RETURN key.
Choices are: 0 through 8. See APPENDIX D for examples of
each available font type and for the actual printed size of the
various fonts using different multiplications.
b. A bar code, followed by the RETURN key. Choices are
uppercase A through L for bar codes that include the human
readable interpretation line, or lowercase a through l for bar
codes without human readable lines. Again, see APPENDIX D
for examples of each available bar code.
c. The “Y” and “X” special font choices are not actually fonts. The
“Y” font selects a graphic image that has already been loaded
into the memory module. If this font is selected, you will enter
the name of the graphic image in the DATA/PROMPT field.