Datalogic AV500, Руководство по продукции

Страница: 111 / 324

OPERATING MODE
PRODUCT REFERENCE GUIDE
91
Trigger Source
Select from the drop ‐ down list.
• Position Sensor: triggers when selected position sensor senses a package.
• Photo Sensor: triggers when a photoelectric sensor is blocked.
• Trigger Message: triggers when a trigger message is received from an external device.
•Ethernet/IP: triggers when a trigger message is received from a PLC. The limit is 20
milliseconds.
The following Trigger Source options are available.
Trigger Controller
Select which camera in your system is controlling the trigger message.
Position Sensor Settings (Primary Controller)
Position Sensor Type
Select No Position Sensor, Light Curtain, Dimensioner, S85, or S85 with DL Light Curtain from
the drop ‐ down list, depending on the specific position sensor used by the system.
Position Sensor Height Offset
Enter the distance between the position sensor’s zero height reference point and the
conveyor’s surface. This should be set to zero (0) for other, non
‐ light curtain position sensors.
Position Sensor Transmit Delay
Enter the distance from the position sensor to the transmit point. (See “AV500 System
Elements Positioning” on page 87.)
DL Light Curtain Settings
Connected to
Select a camera in the system to which the light curtain is connected.
Multicast LC Focus Data
Select Disable or Enable. Selecting Enable allows the sending of Light Curtain focus data to ALL
the cameras in the array.