Datalogic AV500, Руководство по продукции

Страница: 108 / 324

E-GENIUS
88
AV500 2D CAMERA
2. Enter the appropriate information in the form as described below:
Operating Mode Selections
Select one of the following modes:
“Packtrack Mode” on page 89
is a patented operating mode for Datalogic devices used to
read and correctly assign codes read on different parcels when placed in the scanner reading
area at the same time. The technology allows for smaller gaps between packages. It can also be
used in bidirectional systems, in which you may want to read codes going forward or reverse.
See “Understanding PackTrack” on page 85.
“Online Mode” on page 96
in Online operating mode, the reading phase is defined as the
time between a Phase ON and Phase OFF event. The Phase events can be signals coming from
one or two external presence sensors connected to the scanner inputs or serial start/stop
strings sent from the host over the serial interface or Ethernet input.
“Continuous Mode” on page 99
is continuous image / frame acquisition mode with
immediate decode result processing and transmission. Frames are acquired at a constant rate
of 32 frames per second with no trigger. Suppression filters are available for eliminating
duplicate decode results within a single frame and across multiple frames and can be
configured either based on time or distance. When using a distance based suppression filter,
distance can be based on a physical encoder where the clock time to timeout will be
dependent on how fast the belt is running or where time will be based on an internal tach set
to 1 meter per second. An option for code replication is also available where a decode result is
replicated or not suppressed when the same code value is decoded but the code types are
different.
Image Saving does not work in Continuous Mode.