Datalogic AV500, Руководство по продукции

Страница: 100 / 324

E-GENIUS
80
AV500 2D CAMERA
Partial Reads
Number of labels partially read by the system (only some of the barcodes set in the “Group
Label” settings are read).
Read Rate
The number of good reads divided by the total number of reads.
Frame Rate (fps) frames per second
The total number of frames per second captured by the camera.
Total Barcodes
Indicates the number of barcodes read from all the scanners, including Multiple Reads.
Barcodes Discarded
Barcodes not programmed in “Code Definition” parameters group + "Barcodes Out" + “Encoder
Errors”.
Barcode In
Total number of barcodes found on the packs detected by the single scanner.
Barcode Out
Total number of barcodes found outside the packs detected by the single scanner.
Barcodes Uncertain
Total number of barcodes found that intersect more than one pack, and are therefore ambiguous,
detected by the single scanner. This is visible only when Operating Mode is PackTrack.
Solo Group Read
The total number of times a single defined group was read
Total Group Read
The total number of times all defined groups were read
G
ROUP
L
ABEL
S
TATISTICS
Good Read
Increases when all barcodes programmed in the related “Group Label are read.
Multiple Read
Increases when more than one barcode programmed in the related “Group Label” setting is
read.
These statistics are exposed by clicking the “Show Group Label Statistics” button, which
will then change to “Hide Group Label Statistics.” This button is disabled until there is
something to show, e.g. it will be disabled if you have Reset Counts and not inducted any
packages yet.
The legend changes from “Code Label X” to “Group Label X” when using “Log-
ical Combination” as the “Code Combination” setting.