Datalogic AV500, Руководство по продукции

Страница: 112 / 324

E-GENIUS
92
AV500 2D CAMERA
Dimensioner Settings
Place Dimensioning Results Based on Tach
Select the check ‐ box to enable placement of the Dimensioning results based on the
tachometer. This option works in conjunction with the DM3610 when the Datalogic Message is
selected as it's transmit message format. the AV500 will receive the message at the defined
Transmit Point Distance parameter.
Transmit Point Distance
Enter the distance in the field provided. This is the distance at which the transmit point occurs
and the AV500 is looking for the information from the DM3610/DC3000.
Transmit Point Reference Edge
Select Leading Edge or Trailing Edge from the drop ‐ down list to reference the leading or trailing
edge of the package edge of the DM3610 message.
Connected to
Will default to Active Controller. Active Controller indicates the Dimensioner must be
connected to the Active Controller in the cluster. Click the drop
‐ down to select the camera the
Dimensioner is connected to. This will force the selected camera to accept Dimensioner data,
all others will ignore incoming Dimensioner data.
Side by Side Verification
Select Enabled or Disabled from the drop ‐ down list. Select Enabled if your system requires Side
by Side Verification. This is only available for Dimensioners.
In a “singulated” material handling system, parcels are separated by at least the minimum
spacing distance along the direction of travel; there is at most one parcel across the conveyor
at a time; therefore there is only one parcel present during a trigger cycle. A trigger is typically
generated by a photoeye or a hardware signal from the sorter.