■ Stopping the System
≡
Ending a Job
PSV5000 Operator’s Manual
- 67 -
Empty the reject bin
whenever it looks full;
there is no ‘Full’
indicator.
To remove all devices that are currently in programmers:
Click
Clear
on the
Run
window. All devices will be removed from the pro-
gramming sockets and placed in the reject container.
Ending a Job
To end a job prior to programming the preset number of devices, click
Finish
on the
Run
Window. This completes the current programming cycle. No more
blank devices are picked from the input media, and all devices in the sockets
are removed and placed in the appropriate output or reject container.
The job can be resumed by selecting it again in TaskLink and clicking
Run
.
CH700 SW will continue the job where it left off (when
Finish
was clicked).
It is NOT necessary to restart programmers between jobs.
Empty the reject bin or tray after ending a job.
