Danfoss VLT series, Руководство по эксплуатации

Страница: 27 / 48

VLT 5000 series FC 302 series
Parameter 319 Terminal 42,
Output
Digital = Par. 5-32 DO X30/7
(MCB 101)
Analogue values= Par. 6-50 AO
42
Pulse = Par. 5-66 DO X30/6
Parameter 321 Terminal 45,
Output
Digital = Par. 5-33 DO X30/7
(MCB 101)
Analogue values= Par. 6-60 AO
X30/8
Pulse = Par. 5-66 DO X30/6
Options [15] Out of
frequency range Par. 5-32 = [15] Out of speed
range
[16] Over f low Par. 5-32 = [16] Below speed
low
1)
[17] Under f high Par. 5-32 = [17] Above speed
high
1)
[18] Out of feedback
range Par. 5-32 = [18] Out of feedb.
Range
[19] Over feedback
low Par. 5-32 = [19] Below
feedback low
1)
[20] Under feedback
high Par. 5-32 = [20] Above
feedback high
1)
[21] Thermal
warning Par. 5-32 = [21] Thermal
warning
[22] Ready, no
thermal warning Par. 5-32 = [12] Ready,no
thermal W
[23] Ready - remote
control - no thermal
warning Par. 5-32 = [23] Remote, ready,
no TW
[24] Ready – mains
voltage within range Par. 5-32 = [24] Ready, Voltage
OK
[25] Reversing Par. 5-32 = [25] Reverse
[26] Bus OK Par. 5-32 = [26] Bus OK
[27] Torque limit and
stop Par. 5-32 = [27] Torque limit &
stop
Table 5.107 Conversion of Parameters 319 to 321
VLT 5000 series FC 302 series
Parameter 319 Terminal 42, Output Digital = Par. 5-32 DO
X30/7 (MCB 101)
Analogue values= Par. 6-50
AO 42
Pulse = Par. 5-66 DO X30/6
Parameter 321 Terminal 45, Output Digital = Par. 5-33 DO
X30/7 (MCB 101)
Analogue values= Par. 6-60
AO X30/8
Pulse = Par. 5-66 DO X30/6
Options [28] Brake, no brake
warning Par. 5-32 = [28] Brake, no
brake warning
[29] Brake ready, no
fault Par. 5-32 = [29] Brake
ready, no fault
[30] Brake fault Par. 5-32 = [30] Brake fault
(IGBT)
[31] Relay 123 Par. 5-32 = [31] Relay 123
[32] Mechanical brake
control Par. 5-32 = [32] Mech
brake ctrl
[34] Extended
mechanical brake
control Par. 5-32 = [32] Mech
brake ctrl
[35] Safety Interlock Not supported
[36] 0 – 100 Hz
⇒
0 – 20
mA
Not supported
[37] 0 – 100 Hz
⇒
4 – 20
mA
Not supported
[38] 0 – 100 Hz
⇒
0 –
32000 p
Not supported
[39] 0 – f max
⇒
0 – 20
mA
Par. 6-50 = [109] Max Out
freq. 0 – 20 mA
[40] 0 – f max
⇒
4 – 20
mA
Par. 6-50 = [130] Max Out
freq. 4 – 20 mA
[41] 0 – f max
⇒
0 –
32000 p
Par. 5-66 = [109] Max Out
freq. 0 – 32000p Par. 568 =
32000
[42] Ref min – Ref max
⇒
0 – 20 mA
Par. 6-50 = [101] Reference
0 -20 mA
Table 5.108 Conversion of Parameters 319 to 321
Parameter Mapping Lists
VLT
®
AutomationDrive FC 302 PROFIBUS Converter Operating Instructions
MG34N202 - Rev. 2013-10-15 25
5 5