VLT 5000 series
FC 302 series
Parameter
027 Warning readout line
Not converted
Options
[0] Warning in line 1/2
[1] Warning in line 3/4
Table 5.18 Conversion of Parameter 027
5.2 VLT
®
5000 Parameter Group 1
VLT 5000 series
FC 302 series
Parameter 100 Configuration 0-02
1-01 Motor Control Principle
Options
[0] Speed control,
open loop
Par. 1-00 = [0] Speed open loop
Par. 1-01 = [1] VVC
plus
[1] Speed control,
closed loop
Par. 0-02 = [0] RPM
Par. 1-00 = [1] Speed closed loop
[3] Process
control, closed
loop
Par. 1-00 = [3] Process
Par. 1-01 = [1] VVC
plus
[4] Torque control,
open loop
Par. 1-00 = [4] Torque open loop
Par.1-01 = [1] VVC
plus
[5] Torque control,
speed feedback
Par. 1-00 = [2] Torque close loop
Par. 1-01 = [3] Flux with motor fb
Par. 5-71 = [1] Counter clockwise
Table 5.19 Conversion of Parameter 100
VLT 5000 series
FC 302 series
Parameter 101 Torque charac-
teristic
1-03 Torque Characteristics
1-04 Overload Mode
14-40 VT Level
Options
[1] High constant
torque
Par. 1-03 = [0] Constant torque
Par. 1-04 Over load = [0] High
[2] High variable
torque low
Par. 1-03 = [1] Variable torque
Par. 14-40 VT level = 45%
Par. 1-04 Over load = [0] High
[3] High variable
torque medium
Par. 1-03 = [1] Variable torque
Par. 14-40 VT level = 66%
Par. 1-04 Over load = [0] High
[4] High variable
torque high
Par. 1-03 = [1] Variable torque
Par. 14-40 VT level = 85%
Par. 1-04 Over load = [0] High
[5] High special
motor characteristic
Par. 1-01 = [0] U/f
Par. 1-04 Over load = [0] High
[6] High variable
torque with low
starting torque
Par. 1-03 = [1] Variable torque
Par. 14-40 VT level = 45%
Par. 1-04 Over load = [0] High
Table 5.20 Conversion of Parameter 101
Parameter Mapping Lists
VLT
®
AutomationDrive FC 302 PROFIBUS Converter Operating Instructions
14
MG34N202 - Rev. 2013-10-15
5
5
