10.2.14 Inrush Card
To remove or reinstall the inrush card, use the following
steps. Refer to
.
Disassembly
1.
Remove the DC bus rails. Refer to
.
2.
Unplug the cables from the following connectors
on the inrush card:
2a
MK1800
2b
MK1802
3.
Remove 5 screws (T20) from the inrush card.
4.
Remove the inrush card from the drive.
Reassembly
Tighten hardware according to
.
1.
Position the inrush card in the drive.
2.
Fasten 5 screws (T20) in the inrush card.
3.
Fasten the cables to the following connectors on
the inrush card:
3a
MK1800
3b
MK1802
4.
Replace the DC bus rails. Refer to
.
D1h/D3h/D5h/D6h/J8 Drive Di...
VLT
®
FC Series, D1h–D8h, Da2/Db2/Da4/Db4, E1h–E4h, J8/J9
148
Danfoss A/S © 02/2019 All rights reserved.
MG94A502
10
10
Содержание VLT FC Series
Страница 2: ......
Страница 369: ...Index Service Guide MG94A502 Danfoss A S 02 2019 All rights reserved 367...